Skip to main content

TallyLights NewTek TriCaster controller installation

December 06, 2022​

NewTek TriCaster Controller Installation​

  1. Use the included USB A-B cable to connect the TallyLights Controller to your computer.
  2. Download the NewTek Tricaster TallyLights Controller software .
  3. Install the software using the wizard.
  4. By default, the install wizard creates the following folder when utilizing a TriCaster video mixer.

NewTek TriCaster Controller Configuration​

    1. Power up the NewTek Tricaster.
    2. Add the cameras to the first 8 inputs of your NewTek TriCaster.
      • The cameras must be set to the first 1-8 sources to ensure compatibility with the controller.
    3. Setup is complete. The emitters will now trigger when set to Program and Preview through NewTek TriCaster.