Skip to main content

Default Network Ports Used by PTZOptics Cameras

April 03, 2025​

If utilizing your PTZOptics camera on a network you may need to know what ports the camera utilizes for basic operation(s).

Please see the list below that identifies the default ports you may need to be aware of and what service they are providing.

  • 80 (HTTP) *This port is able to be re-assigned from the cameras WebUI
  • 81 (SOAP)
  • 123 (NTP)
  • 443 (HTTPS)
  • 554 (RTSP - Unicast Streams) *This port is able to be re-assigned from the cameras WebUI
  • 1234 (SDK) *This port is able to be re-assigned from the cameras WebUI
  • 1259 (UDP Control) *This port is able to be re-assigned from the cameras WebUI
  • 1935 (RTMP Streaming)
  • 5678 (TCP Control) *This port is able to be re-assigned from the cameras WebUI
  • 5960 (NDI)
  • 5961 (NDI)
  • 6688 (RTP - Multicast Stream 1) *This port is able to be re-assigned from the cameras WebUI
  • 6689 (RTP - Multicast Stream 2) This is for the G2 cameras *This port is always RTP Stream 1s port +1
  • 8890 (RTP - Multicast Stream 2) this is for the 4K camera.
  • 19147 (FreeD control port)
  • 40000 (FreeD Data port)
  • 52381 (Sony VISCA UDP) Visca commands with a header.

If you have any other questions about using your PTZOptics camera on a network please submit a support ticket.